|
|
| Electronics ESCs, LiPo Savers, Servos, BECs & Lighting Systems Don't see what you're looking for? We'll be happy to stock it for you! Just ask!
 | 
Dionysus Design -- Servo Reverser SVRV-PKG-01 • Accurately reverses servo signal so the servo turns in the opposite direction.
• Great for flaps and landing gear, with the use of a Y-cable.
• Weighs only 1 gram.
• 8mm x 44mm x 5mm
• Power consumption: 4 mA
• Over 800 steps of signal input/output resolution.
Our Price: $9.99
|
 |
Dionysus Design -- Servo Rate Reducer (4 Seconds) SVRR-PKG-1 • Slows down the servo signal so landing gear and flaps move more realistically and predictably.
• Great for flaps and landing gear, with the use of a Y-cable.
• Weighs only 1 gram.
• 8mm x 44mm x 5mm
• Designed for use with 2 or 3 position transmitter switches.
• Slows down the servo signal so full range movement takes 4 seconds.
Our Price: $9.99
|
 |
Dionysus Design -- Servo Rate Reducer (6 Seconds) SVRR-PKG-2 • Slows down the servo signal so landing gear and flaps move more realistically and predictably.
• Great for flaps and landing gear, with the use of a Y-cable.
• Weighs only 1 gram.
• 8mm x 44mm x 5mm
• Designed for use with 2 or 3 position transmitter switches.
• Slows down the servo signal so full range movement takes 6 seconds.
Our Price: $9.99
|
 |
HXT500 Micro Servo • Size : 22.9 x 11.4 x 22 mm / 0.9 x 0.45 x 0.87 in
• 5 grams / 0.18 ounces
• 0.10 sec/60 (4.8V)
• 0.8 kg-cm
• Servo arms & screw included
• Great for parkflyers and combat airplanes!
Our Price: $8.49
|
 | HXT900 Micro Servo • Size : 21 x 12 x 22 mm / 0.74 x 0.42 x 0.78 in
• 9 grams / 0.32 ounces
• 0.12 sec/60 (4.8V)
• 1.6 kg-cm
• Servo arms & screw included
• Similar to Hitec HS-55
Our Price: $9.49
|
 | HXT900 Micro Servo Replacement Gear Set
Our Price: $2.49
|
 | TowerPro 9g 12 Amp Brushless Speed Controller • Amp Rating: 12 Amps Constant (max 15 Amps Burst)
• BEC: 1.5 Amps @ 2s LiPo (4-5 servos), or 1.0 Amps @ 3s LiPo (3-4 servos) • Size: 22x18x6 mm
• Voltage: 6 - 12 Volts • Battery: 2s - 3s LiPo (or 5s - 12s NiMh or NiCad) • Low Voltage Protection: Soft Cutoff @ 6.0 Volts for 2s LiPo, or 9.0 Volts for 3s LiPo • Weight: 8.5 grams
Our Price: $16.99
|
 | TowerPro 18 Amp Brushless Speed Controller • Amp Rating: 18 Amps Constant (max 25 Amps burst)
• BEC Current: 1.5 Amps @ 2s LiPo (4-5 servos), or 1.0 Amps @ 3s LiPo (3-4 servos)
• Size: 43x38x10 mm
• Voltage: 6 - 12 Volts • Battery: 2s - 3s LiPo (or 5s - 12s NiMh or NiCad) • Low Voltage Protection: Soft Cutoff @ 6.0 Volts for 2s LiPo, or 9.0 Volts for 3s LiPo • Weight: 20.0 grams
Our Price: $17.99
|
 | TowerPro 25 Amp Brushless Speed Controller • Amp Rating: 25 Amps Constant (max 35 Amps burst)
• BEC Current: 1.5 Amps @ 2s LiPo (4-5 servos), or 1.0 Amps @ 3s LiPo (3-4 servos)
• Size: 45x38x10 mm
• Voltage: 6 - 12 volts • Battery: 2s - 3s LiPo (or 5s - 12s NiMh or NiCad) • Low Voltage Protection: Soft Cutoff @ 6.0 Volts for 2s LiPo, or 9.0 Volts for 3s LiPo • Weight: 24.5 grams
Our Price: $18.99
|
 | TowerPro 30 Amp Brushless Speed Controller • Amp Rating: 30 Amps Constant (max 35 Amps burst)
• BEC Current: 1.5 Amps @ 2s LiPo (4-5 servos), or 1.0 Amps @ 3s LiPo (3-4 servos)
• Size: 45x38x10 mm
• Voltage: 6 - 12 volts • Battery: 2s - 3s LiPo (or 5s - 12s NiMh or NiCad) • Low Voltage Protection: Soft Cutoff @ 6.0 Volts for 2s LiPo, or 9.0 Volts for 3s LiPo • Weight: 35.0 grams
Our Price: $19.99
|
 | MaxPro Battery Monitor for 2s LiPos • Protection for your LiPo batteries
• Sounds a 100 decibel alarm, and lights a red LED when voltage drops below 6.0 volts.
• Plugs into your LiPo battery's balance connector. • Accurate and easy to use. • Weight: TBD
Our Price: $9.99
|
 | MaxPro Battery Monitor for 3s LiPos • Protection for your LiPo batteries
• Sounds a 100 decibel alarm, and lights a red LED when voltage drops below 9.0 volts.
• Plugs into your LiPo battery's balance connector. • Accurate and easy to use. • Weight: TBD
Our Price: $9.99
|
 | 
Navigation Lights / Anti-Collision Lights (Ready To Fly) • 100% ROHS compliant
• Draws only 0.05 amps
• Weighs 0.75 ounce
• Measures 1.9" x 2.5"
• 1 "solid LED" connector
• 1 "landing light LED" connector
• 3 "blinking LED" connectors (each connector has different timing)
• The circuit draws it's power directly from the flight battery -- not the Battery Eliminator Circuit. The circuit can support any battery voltage between 7.4 volts and 35 volts. You can hook up as many LEDs as you want to each connector (so two landing lights hooked to the "landing LED" connector is not a problem). Video of the product features
Our Price: $79.95 SALE PRICE: $49.99
Price includes Printed Circuit Board, all components, wire, Super-Bright LED package (three red, one green, and four white Super-Bright LEDs), and professional soldering by a degreed engineer. |
 |
Navigation Lights / Anti-Collision Lights (Solder It Yourself) • Same as the "Ready To Fly" version, but save some money by soldering it yourslef!
• Includes all components, Super-Bright LEDs, heat shrink, and wire.
• Does not include solder.
You can hook up as many LEDs as you want to each connector (so two landing lights hooked to the "landing LED" connector is not a problem). Video of the product features
Our Price: $33.99
Price includes Printed Circuit Board, all components, wire, Super-Bright LED package (three red, one green, and four white Super-Bright LEDs). |
| |
|